Further Information
Loose gold leaf in suspension for rapid easy gilding of headstones. 200ml
INSTRUCTIONS FOR USE:
- After sandblasting, remove stencil, blow off excess dust.
- Apply first layer (thin layer) of leaf paint to inscription.
- Leave to dry for approximately 2 hours.
- Apply second layer of leaf paint.
- Leave to dry (must be in workshop and not subject to water)
- If another coat is needed follow steps 4&5
- If it all looks good, with a sharp blade and NO water clean off any excess.
IMPORTANT:
- Only apply water once the gold has been cleaned off.
As the leaf paint only sticks to the blasted surface and not to a polished surface, applying water prior to cleaning the excess results in water getting under the leaf paint on the polished surface and lifts it out of the blasted surface.